We are manufacture. Our factory has been specializing in ESD field more than 17 years.
This ionizing air blower is a kind of static eliminating equipment putting on the desk which supports balance ion flow and huge coverage. It is able to neutrilize and eliminate the static charge which spreading widely and not easy to touch. It is desire eleminating equipment of delicate electronic products, medication line of set-up, printing, packing, and delicate products.Discharge effect is still reduced from 1000v to 10v.It is used in the thousands level clean room.It is a excellent industrial product in eliminating static electricity.
1. Rapidly neutralizes static charges,
2. Smart, delicate, easy to operate,
3. Adjustable continuously to wind speed. indicating lamp for ions producing,
4. Small size, light weight and portable,
5. With magnetic leakage transformer, long life span and short-circuit proof ,
6. Variable speed fan with wide range of air flow,
7. Inherently balanced ion output,
8. Ionization indicator lamp,
9. Ion emitter cleaner inside, easy cleaning .
operating normally | |
Fan alarm | The indicator light is on when the fun is stuck or doesn’t rotate; meanwhile, the buzzer sends out alarm sound. |
Fan air flow | 2.56-4.07m3/min |
Voltage regulation mode/ applied voltage | high frequency AC method/2200V |
Ion balance | Within ±10V (measuring distance 300mm) |
Destaticizing time | Within 1.5s (measuring distance 300mm) |
Cleaning timer set time | Can set within 1-999 hours |
Ozone generation amount (ppm) | Within 0.03ppm (measuring distance 150mm) |
Service environment SJt | Indoor 0~40℃ |
Service environment humidity | 15~75% (no condensation) |
Overall size/mm | 192x173x82.3 |
Weight/Kg | 1.5Kg |
Decay Test Conditions | ||||
Operating voltage: AC110V/60Hz or AC220V/50HZ Testing Voltage:±1000V-±100V Environment Temperature: 23℃±2℃ | ||||
Distance | 300mm | 600mm | 900mm | |
Decay Time
| Positive | 1.0s | 2.3s | 4.0s |
Negative | 1.2s | 2.8s | 4.4s | |
Offset Voltage | Positive |
<0±10V
| ||
We are manufacture. Our factory has been specializing in ESD field more than 17 years.
Of course. We do OEM and ODM
Usually 3-7 days. Special cases depend on order quantity and design.
Yes, samples are available at any time. We charge some sample cost and will return it during the next order.